EDI Module

EDI Module Product Selection

As an EDI module supplier, Huamo offers compact, high-flow, and high-temperature configurations for continuous ultrapure water production. The available range includes compact models from 50 to 300 L/h, a KXA-50 module rated at 500 L/h, and a heat-resistant EDI unit designed for feedwater temperatures up to 60°C.

For water treatment equipment manufacturers, system integrators, and industrial buyers, the key selection factors are product flow, feedwater quality, operating temperature, electrical requirements, and connection specifications.

 
First 123 Last
 

Available EDI Module Configurations

Configuration Product / Model Main Specifications
Compact EDI KLX Series 50–300 L/h; six capacity options
Compact EDI KXA Series 50–300 L/h; 75–85% recovery
High-flow EDI KXA-50 500 L/h standard flow; 0.3–0.7 m³/h flow range
High-temperature EDI Heat Resistant EDI Unit Feedwater temperature up to 60°C

The compact KLX and KXA series are intended for smaller ultrapure water systems, laboratory equipment, and OEM water treatment units. The KXA-50 provides a higher standard flow for centralized laboratory supplies, pharmaceutical water systems, and industrial ultrapure water skids.

For hot-water processes, the heat-resistant configuration uses high-temperature-resistant membranes, reinforced resin, and a heat-stabilized polymer housing.

Technical Specifications for EDI Selection

Compact EDI Modules — KLX Series

Parameter Specification
Available models KLX-50L, KLX-100L, KLX-150L, KLX-200L, KLX-250L, KLX-300L
Module flow 50, 100, 150, 200, 250, 300 L/H
Recovery rate 75–85%
Operating current 0–2 A
Feedwater conductivity 1–10 μS/cm; maximum inlet value ≤25 μS/cm for short periods
Feedwater temperature 5–35°C
Optimal operating temperature 25°C
Product water resistivity 10–18.2 MΩ·cm
Feedwater source RO permeate / product water; two-stage RO recommended

High-Flow EDI Module — KXA-50

Parameter Specification
Standard product flow 500 L/H
Product flow range 0.3–0.7 m³/h
Product water resistivity 15–18.25 MΩ·cm
Recovery rate 90–95%
Operating current 1–6 A/DC
Operating voltage 0–400 V
Feed pressure 1.5–5.0 bar
Pressure drop 1.4–2.1 bar
Operating temperature 5–35°C
Optimal operating temperature 25°C
Feedwater pH 6.5–9.0
Dilute port DN32 external thread
Concentrate port DN20 external thread

High-Temperature EDI Unit

Parameter Specification
Maximum feedwater temperature Up to 60°C
Higher-temperature option Custom higher temperature available
Product water conductivity ≤0.055 μS/cm @25°C
Membrane High-temperature-resistant
Resin Reinforced resin stack
Housing Heat-stabilized polymer
Operation Continuous electrodeionization without routine chemical regeneration

OEM Customization and System Integration

Huamo supports OEM EDI module customization. Available adjustment items include:

  • Flow capacity
  • Water connection interfaces
  • Electrical parameters
  • Structural dimensions
  • Product branding

For system integration, the KXA-50 provides DN32 external-thread dilute-water and DN20 external-thread concentrate-water connections. Compact modules are also available in six standard flow capacities from 50 to 300 L/h.

EDI modules are normally installed downstream of reverse osmosis pretreatment. Two-stage RO is recommended for the compact KLX series, while the KXA-50 can be used after single-stage or two-stage RO when feedwater quality is properly controlled.

Project and Supply Support

Huamo supplies EDI modules alongside its wider water treatment membrane and equipment product range.

For large-scale industrial applications, a published salt-lake chemical industry project involved the replacement of 240 EDI modules, each rated at 5 m³/h, for a total ultrapure water system capacity of 1,200 m³/h.

This project provides a documented reference for large-scale EDI module replacement and industrial system integration.

Request an EDI Module Quotation

Send us your required product flow, feedwater quality, target water resistivity or conductivity, operating temperature, and connection requirements.

For replacement projects, you can also provide the existing module model or a photo of its nameplate. Huamo can use these details to identify a suitable EDI configuration and prepare a quotation.

Request a Quote

Fujian Huamo Technology Co., Ltd. is one of the most professional edi module manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to wholesale the best edi module made in China here and get price list from our factory. Contact us for custom service and OEM service.