Fujian Huamo Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of electrodeionization edi module in China. If you're going to wholesale bulk electrodeionization edi module made in China, welcome to get catalog and price list from our factory. All custom made products are with high quality and competitive price. Also, OEM service is available.
Product Details
Electrodeionization EDI module leverages continuous electro-regeneration to transfer anions and cations through specialized membranes, eliminating the need for acid-base chemical logistics and wastewater neutralization systems while maintaining a high-purity product water stream without downtime. Optimized for low-flow industrial and light commercial installations with processing rates between 50 L/H and 300 L/H, this electrodeionization EDI module delivers a steady product water resistivity range of 10-18.2 MΩ·cm throughout its entire operational cycle, avoiding the exhaustion curves typical of traditional mixed-bed alternatives. The hardware is constructed with robust compression plates and heavy-duty structural seals to ensure leak-free performance under continuous industrial pressures.
Product Specifications
|
Parameter |
KLX-50L |
KLX-100L |
KLX-150L |
KLX-200L |
KLX-250L |
KLX-300L |
|
Module Flow (L/H) |
50 |
100 |
150 |
200 |
250 |
300 |
|
Recovery Rate (%) |
75-85% |
75-85% |
75-85% |
75-85% |
75-85% |
75-85% |
|
Product Stream Adjust (L/H) |
50 |
100 |
150 |
200 |
250 |
300 |
|
Concentrate Stream Adjust (L/H) |
10 |
20 |
30 |
40 |
50 |
60 |
|
Operating Current (A) |
0-2 |
0-2 |
0-2 |
0-2 |
0-2 |
0-2 |
|
Feed Water Source |
RO Permeate / Product Water (Two-Stage RO Recommended) |
|||||
|
Feed Water Conductivity (µS/cm) |
1-10 (Maximum Entry ≤ 25) |
|||||
|
Feed Water Temperature (°C) |
5 - 35 (Optimal Operating Performance at 25°C) |
|||||
|
Product Water Resistivity (MΩ·cm) |
10 - 18.2 |
|||||
Technical Advantages & Brand Capabilities
Why Partner With Our Enterprise?
1. Single-Source Technical Engineering Support: We assist integration partners with detailed component drawings, electrical control logic design, and system start-up calibration guidelines.
2. Targeted Component Restoration & Diagnostic Services for electrodeionization EDI module: Our facility provides professional diagnostics for modules showing increased electrical resistance or reduced flow, using targeted chemical flushes to restore factory performance.
3. Rigid Quality Control Protocols: Every unit undergoes hydraulic pressure holding tests and current-voltage curve mapping before packaging and shipment.
Frequently Asked Questions (FAQ)
Q1: What are the primary limits for feed water hardness?
A1: The inlet water hardness must be kept below 0.5 ppm (CaCO3 equivalent) to prevent rapid mineral scaling inside the concentrate channels.
Q2: How does the system respond to free chlorine?
A2: Free chlorine oxidizes and breaks down the ion-exchange resins and membranes. Inlet levels must be maintained at zero, typically using activated carbon filtration upstream.
Q3: What is the estimated lifecycle of this equipment?
A3: Under compliant feed conditions and proper pre-treatment, the module maintains an active operational lifecycle of approximately 4 years.