Household Water Purifier

Nov 10, 2026

Leave a message

1. Front water purifier

The front water purifier is also called the water circuit protector. Generally installed after the household water meter, it can intercept rust, sediment and other particulate impurities, and protect other water purification products and water wading equipment such as faucets, bathrooms, solar energy, washing machines, refrigerators, etc. As the first water purification line of defense in the home, the front water purifier can "intercept" the corrosion of the pipeline and the sediment in the community reservoir. It is convenient to install and use, and can play the role of coarse filtration. The pre-filter does not need power supply, and there is no floor drain. When installing, it is only necessary to weld the pre-filter to both ends of the water pipe. During use, the dirt deposits on the lower part of the filter can be observed regularly. When there is a lot of dirt, open the valve at the bottom to flush, and the filter element needs to be replaced regularly. The filter element of the pre-filter is usually a PP filter element and an activated carbon composite filter element. When installing, leave enough space at the bottom to facilitate the replacement of the filter element.

 

2. Rear water purifier

It is usually installed in the cabinet under the kitchen sink to provide dishwashing, vegetable washing, and drinking water. This location is close to the water source and the sewer, and it is convenient to obtain water and drain dirty water, but it needs to be used with a power outlet. There are two types of post-installed water purifiers on the market today: RO reverse osmosis type and UF ultrafiltration type.

The water filtered by the UF ultrafiltration water purifier is generally not drunk directly, but boiled as much as possible before drinking. The water obtained by the RO reverse osmosis water purifier can be directly drunk, so the price is also higher. However, if you choose RO reverse osmosis water purifier, you have to face two choices - with barrel or without barrel?

There are bucket water purifiers that have a small bucket in addition to the filter element. This bucket is a water storage bucket, also known as a pressure bucket, which mainly plays the role of balancing water volume and pressure. The pressure bucket can effectively avoid the frequent opening of the safety valve and the frequent replenishment of the automatic replenishment valve. That is to solve the problem of small water output, and can store water, even when the water is cut off, the supply of pure water can be normal. The disadvantage is that it is bulky and takes up space under the kitchen. In addition, it should be noted that the pressure barrels that have been used for more than two years are easy to age, and the antibacterial ability has decreased, and the barrels need to be replaced in time.

Barrelless water purifiers have only one filter element connected to the pipeline, which can be used directly by unscrewing the faucet. It does not take up space and is convenient and fast, but the water output speed is slow, which cannot solve the drinking water needs of households that consume a lot of water, and once the water is stopped cannot be used. The pump needs to be restarted every time it is used. When purchasing, you can choose a water purifier with a large water flux. The higher the flux, the faster the water will be discharged. As for whether to choose a bucket or no bucket, it should be considered according to your own domestic water situation and your own needs.

 

3. Precautions for filter replacement

PP cotton filter element: The recommended replacement cycle is about 6 months.

UDF granular activated carbon: The recommended replacement cycle is 9-12 months.

CTO compressed activated carbon: The recommended replacement cycle is: 6-16 months.

UF ultrafiltration membrane: The recommended replacement cycle is: 3-12 months.

RO reverse osmosis membrane: The recommended replacement cycle is: 12-24 months.

The water quality is different, and the degree of loss to the filter element is also different. If the water quality is poor, the service life of the filter element will also be shortened. Therefore, the core change cycle varies from place to place to use.

 

4. Precautions for use

Power outage

If you are away from home for a long time, the rear water purifier should be cut off from water and electricity. It can avoid water leakage caused by the faucet falling off due to excessive water pressure, and also avoid machine damage caused by voltage instability or circuit failure.

Open the sewage outlet to discharge the sewage

Before using it again for a long time, the sewage outlet of the front water purifier should be opened to discharge impurities such as sediment and rust, so as to avoid the blockage of the water purifier, no water or peculiar smell in the water.

Rinse the water purifier

If the rear water purifier is only out of use for a few days, you need to turn on the faucet to rinse for 3-5 minutes; if it is more than 10 days, it needs to be rinsed for more than 15 minutes, otherwise the water may have an odor. If it is not used for more than 3 months or even longer, the filter element will be shrunk, the pore size will shrink, and the original filtering function will be lost. At the same time, it may breed bacteria and mold, causing secondary pollution. Therefore, it is recommended to clean the filter element before use. If it is found that the water purification effect is not good after cleaning, the filter element needs to be replaced.