Basic Principles and Advantages of RO

The reverse osmosis membrane is the core component of this technology. It is a synthetic semi-permeable membrane-engineered from polymer materials-designed to mimic the characteristics of biological semi-permeable membranes.
Reverse osmosis is a membrane separation process that uses a pressure differential to extract a solvent from an aqueous solution, effectively filtering out impurities. It is termed "reverse" osmosis because the process occurs in the direction opposite to natural osmosis.
The technical principle involves applying pressure to one side of the membrane. When this applied pressure exceeds the osmotic pressure of the solution, the solvent is forced to permeate in the opposite direction, thereby separating the solvent from the solutes. The solvent obtained on the low-pressure side of the membrane is called the "permeate," while the concentrated solution remaining on the high-pressure side is known as the "concentrate" (or brine).
When applied to seawater, reverse osmosis yields fresh water on the low-pressure side and brine on the high-pressure side. By manipulating the pressure, the technology can be used for separation, extraction, purification, and concentration.
As a water treatment method based on membrane separation, reverse osmosis functions as a physical process involving cross-flow filtration. Its advantages include:
It operates at room temperature using water pressure as the driving force, resulting in lower operating costs.
It does not generate large volumes of waste acid or alkali, making it environmentally friendly.
The system is simple, easy to operate, and highly automated.
It is highly adaptable to varying raw water quality and produces a stable, high-quality effluent.
The equipment has a small footprint and requires minimal maintenance.
Basic RO Water Treatment Processes
First, the single-stage, single-pass process: As the liquid enters the membrane module, the permeate (purified water) and the concentrate are separated and extracted. While this process is straightforward and easy to operate, it has significant limitations and may not meet more stringent water quality requirements.
Second, the single-stage, multi-pass (or multi-stage concentration) process: Building upon the single-stage, single-pass configuration, this approach subjects the liquid to multiple successive stages of concentration. Compared to a single-stage, single-pass treatment process, this process is more complex; it can meet stricter water quality requirements and facilitate the recycling of water resources.
Third, the two-stage, single-pass treatment process. When a single-stage method is insufficient to meet specific water quality requirements, a two-stage, single-pass process may be employed. Compared to the aforementioned single-stage processes, this two-stage, single-pass approach extends the service life of reverse osmosis (RO) membranes, requires less manual intervention, and results in lower overall treatment costs.
Application of RO in Water Treatment
Advanced Treatment of Municipal Wastewater
In the advanced treatment of municipal wastewater, reverse osmosis technology is widely used to increase the wastewater recovery rate.
The effectiveness of advanced wastewater treatment varies depending on the material of the RO membrane used. In municipal wastewater treatment-specifically when the effluent from residential sewage treatment requires further purification (e.g., for water reuse)-membranes such as cellulose triacetate hollow-fiber membranes or spiral-wound polyvinyl alcohol (PVA) composite membranes often yield superior results.
Compared to other types of RO membranes, these two materials achieve a 100% rejection rate for fecal coliforms, keep color levels at or below 1 degree, and maintain permeate concentrations between 1 mg/L and 2 mg/L. Furthermore, these membranes offer higher water flux and greater resistance to fouling.
Industrial Wastewater Treatment
1) Removal/Recovery of Heavy Metal Ions
Applying reverse osmosis technology to industrial wastewater treatment is highly effective. It aligns with the principles of industrial economic efficiency, helping to reduce energy consumption, operating costs, and the complexity of operational management.
RO systems used for industrial wastewater treatment typically utilize internally pressurized tubular or spiral-wound modules. Operating at a stable pressure of approximately 2.8 MPa, these systems are exceptionally effective at recovering heavy metal ions. For instance, systems using internally pressurized tubular modules-operating at a stable pressure of 2.7 MPa-can achieve a nickel recovery rate of over 99% and a nickel separation rate ranging from 97.12% to 97.17%. 2) Treatment of Oily Wastewater
Generally, oil in oily wastewater exists in three forms: emulsified oil, dispersed oil, and free-floating oil. Dispersed and free-floating oils are relatively easy to remove; mechanical separation, sedimentation, and activated carbon adsorption can significantly reduce their concentrations. Emulsified oil, however, is highly stable-often containing organic substances that act as surfactants-and consists of oil droplets on the order of microns, making rapid and effective oil-water separation difficult.
Reverse osmosis (RO) technology allows for concentration and separation without breaking the emulsion. The resulting concentrate can then be incinerated, while the permeate can be recovered for reuse or discharged.
In current practice, RO technology is frequently combined with other treatment methods to ensure optimal final treatment results and high-quality effluent. For instance, a custom-formulated demulsifier, DEMUL-B1, can be used to break down high-concentration oil-in-water (O/W) emulsions-such as those found in textile spinning wastewater-followed by further treatment using an OSMONICS SE-series reverse osmosis membrane. This "demulsification-reverse osmosis" process achieves a chemical oxygen demand (COD) removal rate of 99.96%, with oil content rendered virtually undetectable.
3) Desalination of Brackish Water
In the desalination of brackish water, reverse osmosis technology effectively removes inorganic salt ions-such as magnesium and calcium-thereby enhancing the quality of the purified water.
As requirements for water purity continue to rise, traditional treatment methods (such as adding scale inhibitors to the brackish water) are no longer sufficient to meet current standards, making the adoption of reverse osmosis technology an essential choice.
When using reverse osmosis systems for brackish water desalination, it is necessary to regularly monitor the Silt Density Index (SDI), strictly control the recovery rate, track pressure differentials across membrane modules, and continuously measure changes in permeate flow and salt rejection rates. In practice, the salt rejection rate of reverse osmosis (RO) systems remains consistently above 96%, and the quality of the desalinated water meets my country's national standards for drinking water.
Addressing RO Membrane Fouling
Membrane fouling refers to the adsorption or deposition of particles, colloidal matter, or large solute molecules-present in the feed solution-onto the membrane surface or within its pores. This occurs due to physical or chemical interactions, concentration polarization (where solute concentrations exceed their solubility limits), or mechanical processes. Such fouling reduces or blocks membrane pores, leading to an irreversible decline in both membrane flux and separation performance.
Microbial Fouling
1) Causes
Microbial fouling occurs when microorganisms accumulate at the membrane-water interface, impairing system performance.
These microorganisms utilize the RO membrane as a substrate and thrive on nutrients present in the concentrated brine stream. They form a biofilm on the membrane surface, which causes a rapid increase in the pressure differential across the RO system, a sharp decline in permeate flow and salt rejection, and contamination of the product water.
The biofilm-composed of microorganisms-can degrade membrane polymers or other system components, either directly (via enzymatic action) or indirectly (by altering local pH or redox potential). This shortens the membrane's lifespan, compromises its structural integrity, and can even lead to major system failures.
2) Control Methods
Biofouling can be managed through continuous or intermittent disinfection of the feed water. For raw water sourced from surface or shallow groundwater, a disinfection dosing system should be installed to add chlorine-based biocides, typically maintaining a residual chlorine concentration of >1 mg/L in the feed water.
Chemical Fouling
1) Causes
A common form of chemical fouling is the deposition of carbonate scale within the membrane elements. This is frequently caused by operational errors, inadequate antiscalant dosing systems, or interruptions in the supply of antiscalants during system operation. If not detected in a timely manner, issues such as increased operating pressure, greater pressure differential, and a decline in water production rate can emerge within just a few days. Furthermore, if the chosen antiscalant is incompatible with the water quality, or if the dosage is insufficient, scaling may occur within the membrane elements. While mild scaling can often be remediated through chemical cleaning, severe scaling can render heavily fouled membrane elements unusable, requiring their replacement.
2) Control Methods
To prevent scaling within membrane elements, it is essential to first select an appropriate reverse osmosis (RO) antiscalant tailored to the specific source water quality and determine the optimal dosage. Additionally, monitoring of the dosing system should be strengthened; operational parameters must be closely tracked so that any subtle changes or anomalies can be investigated promptly. Since high Fe³⁺ concentrations in the water are frequently introduced by the piping system, it is advisable to use plastic-lined steel pipes-including for the source water supply lines-to minimize Fe³⁺ levels.
Suspended Particulate and Colloidal Fouling
1) Causes
Suspended particles and colloids are the primary substances responsible for the fouling of reverse osmosis membranes and are the main cause of SDI (Silt Density Index) values in the product water exceeding specified limits.
The composition of suspended particles and colloids varies significantly depending on the source water and geographical location. In typical, uncontaminated surface water or shallow groundwater, these components may include bacteria, clay, colloidal silica, iron oxides, humic substances, and residues from excessive flocculants or coagulant aids (such as iron or aluminum salts) introduced during the pretreatment process.
Additionally, this type of fouling can also be caused by the formation of precipitates resulting from the interaction between positively charged polymers in the raw water and negatively charged antiscalants used within the reverse osmosis system.
2) Control Methods
When the suspended solids content in the raw water exceeds 70 mg/L, pretreatment typically involves coagulation, clarification, and filtration. If the suspended solids content is below 70 mg/L, coagulation followed by filtration is generally employed. For raw water with a suspended solids content of less than 10 mg/L, direct filtration is typically used as the pretreatment method. In addition, microfiltration and ultrafiltration have recently emerged as effective membrane-based methods for addressing turbidity and non-dissolved organic matter. Capable of removing all suspended solids, bacteria, and the majority of colloids and non-dissolved organic matter, these technologies serve as an ideal pretreatment process for reverse osmosis (RO) systems.
Considerations for RO Applications
When employing reverse osmosis technology for water treatment, the wastewater must undergo necessary filtration. Filtration is the foundation upon which RO technology functions; therefore, the filtration process must be strictly controlled to prevent impurities from entering the RO system. This protects the RO membranes and equipment, increases water output, and reduces the risk of corrosion.
RO units require regular flushing-specifically to remove scale-to maintain the optimal performance of the semipermeable membranes and extend the service life of the equipment.
When an RO unit is not in use, residual wastewater can lead to the proliferation of microorganisms. Consequently, during periods of inactivity, the unit must be flushed and disinfected. Furthermore, the temperature during these idle periods should be carefully managed to safeguard the RO membranes.
Operators must strictly adhere to established operating procedures and standards, while continuously enhancing their professional competence. Thorough inspections should be conducted before the equipment is put into operation to prevent damage caused by human error, thereby ensuring the system functions correctly and wastewater treatment operations proceed smoothly.





